InteliCount software makes vision easy ...

NOW works with the M40 or M30 from Vision Components!

The software uses a unique approach to help you specify your inspection requirements. A PC is connected to the CMV 100 for setting up new inspections, but once it is inspecting on the production line, the PC can be disconnected.

To download the InteliCount or HyperVision software ...

To run the InteliCount or HyperVision software your PC should have a minimum specification of:
486DX processor, 16 MB RAM, running Windows 98 or Windows 2000. You will also need at least 1 MB of hard disk space and an SVGA with 800 X 600 screen resolution and 256 color display.

Click below to download Version 1.0 of the InteliCount or HyperVision software. When prompted, choose to save the file to disk. The software is distributed as a zip file and will take about 20 minutes to download with a 28.8k modem. Once downloaded, the installation disks need to be extracted (unzip using either Winzip or Pkzip) to your hard drive (or to floppy disks). If you are an existing CMV 100 or CMV 1000 user then please remember to upgrade your camera before installing the new software on your PC. The Intelicount Plus and Pro require a VC M40 or VC 38 respectively.

Software Downloads:
InteliCount [ Download NOW  ] (for the M30, M40, and VC38) 702 Copies downloaded so far
HyperVision [ Download NOW  ] 614 Copies downloaded so far
OCR for the CMV 100 or M40[ Download NOW  ] 584 Copies downloaded so far
OCR for the CMV or VC38 [ Download NOW  ] 642 Copies downloaded so far
This software has been tested with Windows 98, Windows XP, Windows NT 4.0 and Windows 2000
Checker Version 4.02 [ Download NOW  ] 611 Copies downloaded so far
This software has been tested with Windows 95, Windows 98, Windows NT, and Windows 2000

Would you like further information, or do you need help? Then click here.

Home

TOP

Last Updated March 2001